Ob txheej nrog cov khoom sib txawv, los hloov cov txheej txheem ob zaug.
Tib lub sijhawm txhaj tshuaj lossis ntu ntu kom ncav cuag cov nyhuv gradient.
Kho kom haum los ua ib qho khoom xim, muab mutil - ntau hom kev ua haujlwm thiab kev pabcuam.
Optimized tsim ntawm cov ntsia hlau thiab chim, nrog zoo plasticizing muaj peev xwm thiab kev ua tau zoo.
Ob theem qhia kab qauv ntawm kev txhaj tshuaj unit.
| PARAMETER | UNIT | HMD170-DM2 | HMD218-DM2 | ||
| thoob ntiaj teb qhov ntsuas qhov loj me | -- | 282/90 | 587/170 | 445/130 | 873/218 |
| INJECTION UNIT | A | B | A | B | |
| Txhaj ntim (theoretical) | cm3 ua | 129 | 276 | 215 | 471 |
| Txhaj hnyav (PS) | g | 117 | 252 | 196 | 423 |
| ib oz | 4.1 | 8.9 | 6.9 | 15.1 | |
| Txhaj tus nqi | g/s | 98 | 140 | 113 | 192 |
| Ntsia taub hau | mm | 32 | 42 | 38 | 50 |
| Txhaj tshuaj | MPa | 219 | 202 | 207 | 186 |
| Ntsia Hlau L / D piv | -- | 22:1 | 21.8:1 | 22:01 | 22.2:1 |
| Ntsia hlau stroke | mm | 160 | 200 | 190 | 240 |
| Screw ceev (stepless) | r / min | 0-300 | 0-243 | 0-259 | 0-240 |
| CLAMPING UNIT | |||||
| Clamping quab yuam | kN kev | 1700 | 2180 | ||
| Pwm Qhib stroke | mm | 450 | 510 | ||
| Platen loj | hli × mm | 710×690 | 780×780 | ||
| Dist.between khi tuav (H × V) | hli × mm | 480×460 | 530×530 | ||
| Max. hnub ci | mm | 970 | 1060 | ||
| Pwm thickness (Min{0}}Max) | mm | 180-520 | 200-550 | ||
| Ejector stroke | mm | 140 | 140 | ||
| ejector tonnage | kN kev | 50 | 50 | ||
| POWER UNIT | |||||
| Hydraulic system siab | MPa | 16 | 17.5 | ||
| Twj lub cev muaj zog | kW | 18.7 | 23 | 17.5 | 17.5 |
| Lub zog cua sov | kW | 8.5 | 17.7 | 18.3 | 31.3 |
| Tus naj npawb ntawm temp control zones | -- | 3 | 5 | 9.6 | 22.6 |
| Lwm tus | |||||
| Roj tank peev xwm | L | 260 | 530 | ||
| Tshuab qhov ntev (L × W × H) | m×m×m | 4.9×2.2×2.1 | 5.5×2.1×2.1 | ||
| Tshuab hnyav | Toj | 6.8 | 8.9 | ||
Cim npe nrov: Tuam Tshoj hybrid txhaj tshuaj molding tshuab manufacturers, lwm tus neeg, Hoobkas
